Follow us on FacebookTwitter Enquiry Hotline & Whatsapp:+86-18201959776 (8:00—21:00 GMT)
Inquiry Basket ( 0 )
Language:
Home>>News

Machineryshops.com

Muyang Pellet Production Line

We stand behind every pellet production line we manufacture.
Machineryshops service network covers more than 80 countries and regions all over the world and has the largest number and strongest localization service team.

Every line is designed and manufactured with our customer's need in mind.
Available Capacity of the Pellet Production Line: 2.5TPH to 35TPH

A complete pellet production line, from raw material processing to final biomass pellet packing, it mainly include Crushing, Drying, Pelletizing, Cooling and Packing, we break down the process into three parts:

1) Raw Material Handling System (include wood chipper, hammer mill, dryer)
2) Pelleting System (Ring Die Pellet Mill)
3) Packing System (Cooling and Packing)

1. Raw Material Handling System (Option of wood Chipper, Crusher and Dryer)
Confirm your material status and select the pretreatment equipment. Wood Chipper: If the material’s diameter is larger than 10mm, or section bigger than 50*50mm, then you will need:

Hammer Mill
After the wood chipper breaks down the material into smaller pieces, use a grinding machinery to crush the material into powder form which reduces the diameter shall less than 3mm.

Dryer
It consists of two parts, one is hot air stove/furnance for providing heat by burning coal, gas, wood etc. (we recommend wood pellet as a fuel), another is rotory dryer. Generally, the moisture content of the powder material from the hammer hill ranges from 20% to 40%, even higher, no doubt that a dryer is needed. Our Rotary Dryer is combined of Hot Air Stove and Main Rotary Dryer, which can realize to reduce the moisture from 60% to 10%.

2. Pelleting System (Ring Die Pellet Mill)

Ring Die Pellet is the heart of the pelleting machine production line.
Pellet machine is widely used in compacting of wood, straw, and other biomass sources into pellet. Capacity ranges from 1T to 10T per hour.

3. Packing System (Cooling and Packing)

Cooling and Packing is an important subsidiary device for the pellet production line. Cooling: lower the temperature from 80 degrees to 35 degrees and reduce the moisture to ensure the quality of the pellet, also good for storage. Transfer the biomass pellet from the cooler to the packing machine.

Reviews

Write a review

If you would like to write a review, please login first.